Configure IP Phone License

Written by B3Networks Academy

Updated at December 2nd, 2024

+ More

Table of Contents

Manual Provision: Auto-provision for supported brands and models: Update Yealink Firewall Details: Configuration

IP Phone license is to connect to IP Devices or Softphones to make outgoing calls and receive incoming calls.

There are 2 options to provision the IP License:

Manual Provision with SIP credentials.
Provision from the portal (supported brands and models only)

Manual Provision:

Go to Bizphone app > Extensions
Select the extension to be provisioned > Activated devices > IP phone
Click Reset your SIP password

After reset, system will display the password only 1 time for User to copy and Store at their side, then the SIP Password won’t appear on the Portal anymore.

In future, if user forgot the password, it needs to be reset again.
Register these credentials to the IP phone/Softphone. You can contact your phone provider for detailed instructions.

Auto-provision for supported brands and models:

Go to Bizphone > Settings > IP Phone
Click Firewall Config > allow Service Provision Server and your Device Server accordingly
Click Import MAC addresses > Fill in your MAC addresses
- MAC addresses are 12-digits hexadecimal numbers.
Click edit to give the device a name and assign it to an extension > Save
Click Auto Provision > reset your IP devices by Factory Default to complete the provision.

Manufacturer	Model
Yealink	W52P
	T58
	T56A
	T53W
	T48U
	T48S
	T43U
	T42U
	T42S
	T41P
	T40P
	T31P
	T31G
	T23P
	T23G
	T21P
	T20P
	CP965
	CP920
Fanvil	X1
	X3S
	X3SG
	X3SL
	X3SP
	X3SW
	X3U
	X3UP
	X4
	X5S
	X5U
	X6
	X7

Update Yealink Firewall Details:

Yealink has added new servers and requires users who use IP Phone Auto Provisioning to add new IP addresses to their firewall in order to use the service properly.

Configuration

Open Bizphone App
Go to Settings
Open IP phone
Go to Firewall Configuration
Click on Yealink Provision Server

license setup ip config

Contact Us